Nokia TA-1046 Firmware Flash File

Download Stock Firmware/Flash File For Nokia TA-1046:

Download Official Stock Firmware Flash File For Nokia TA-1046. If You own Nokia TA-1046 Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Nokia TA-1046 Run on Android 8.0 OS & it is Powered by QCOM SD 660 Processor. it is a Dual SIM Smartphone Support Nano SIM Cards, Including all other Connectivity Features Like Bluetooth hostpot & WIFI.

The Device Come with 4GB of RAM and 64GB of Storage Can Be Expandable via SD Card. in the Camera Department it Come with 12+13MP Rear Camera With a 16MP Front Shooter.

Note-

• Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
• Please Do carefully, We are Not Responsible for any Damage to Your Device.
• Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

• backup Your Personal data

Firmware Information-

Device Name: Nokia TA-1046
Type: Full ROM
ROM Size: up to 2.3GB
SoC: QCOM SD 660
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware version: TA-1046_132E-0-00WW-B07_17032018_NB0

Downloads:

Firmware:

• TA-1046_132E-0-00WW-B07_17032018_NB0: Download
• B2N-346B-0-00CN-B02 QFIL (9.0) untested for B2N only : Download
• If your Nokia TA-1046 comes with Android 9 Pre-installed, you will not be able to downgrade to Android 8.X.

Flash Tools:

• OST: Download
• QFIL: Download

usb Driver: 

• QD Loader Driver: Download

How to Install Via QFIL:

• Download & Extract QFIL tools.
• Download & Extract Firmware Package.
• Install QD Loader usb Driver on PC
• Connect Phone to PC & Reboot to EDL use code Via adb: adb reboot edl
• You Can usb Driver Like below Image in Device Manager

• Run QFIL and Load Programmer and XML Files From ROM Folder
• Click Download

• Wait until Success. Your Phone Rebooted…

How to Install Via OST:

• Download and Install usb Driver From above
• Download and Extract ROM File and Flash tools From above
• Install OST tools. and Patched Files.
• Connect Phone to PC & Run OST tools
• Click Select Software image and locate the Extracted Firmware file

• Click Next/Download . wait until Flashing done..Disconnect the device and turn it ON.

---

The post Nokia TA-1046 Firmware Flash File appeared first on ROM-Provider.